May 5, 2020 · XZ Gantry not square to Y. I assembled my printer. It prints well, except that the the X and Y are not perfectly square, they are slightly off, about 1 mm shifted. I verified this by taking off the build plate and use the grid on the heated bed, it doesn't follow the lines left to right.

Feb 20, 2025 · How to square an XL Core XY Gantry. I am replacing the motor mounts and core XY plastic parts with new PCCF parts. With the belts off I was checking the gantry, and it's not square to the front. Per the belt tensioning instructions it's important that …

Navigate the LCD menu to Settings -> Move axis -> Move Z and turn to knob clockwise until the print head/X-gantry is roughly 100-150 mm above the bed. Place the steel sheet vertically on the bed, with the rear notch facing down.

Jun 20, 2024 · As a person who prints engineering grade filaments such as PC, I put my XL in an enclosure to reduce warping. Over time, the supports for the gantry motors warped, and after making me wait over a month Prusa has denied any warranty whatsoever because it isn't an "official product" I used.

Feb 12, 2024 · A 3D printer's gantry can provide a stable platform for components to move along. Read on to learn everything about them!

Jan 10, 2022 · I've been having to manually level my gantry, turning one lead screw by hand and measuring the gantry height of each z axis with a ruler. I've been blaming the leveling inconsistencies on not having a proper endstop to level against.

Oct 16, 2020 · In a Prusa design, the X motor & rail rides up and down on the Z, with the extruder attached to X and the bed attached to Y. Instead, have the X motor & rail ride along the Y - so Y drives X back and forth with one motor and a link, or two motors.

.stl from PrusaSlicer Repo. Could be helpfull for some Remixes | Download free 3D printable STL models.

Aug 10, 2021 · I just picked up a second hand prusa i3 mk3s+ and it missing the entire print gantry. Is anyone familiar enough with the BOM to help me build a list of parts to order and replace the print gantry? Thank you in advanced for the help.

Original Prusa i3 MK3 kit assembly. 1. Introduction; Introduction; 2. Y-axis assembly; 3. X-axis assembly. Tools necessary for this chapter; X-axis: x-end idler and motor holder; X-axis: inserting linear bearings; X-end-motor: tensioner assembly; X-end-idler: bearing assembly; X-axis: smooth rods preassembly; X-axis: assembly; Assembling the X ...