May 31, 2010 · I have a new customer who wants to build a corrugated metal fence, similar to the attached photo. I'm wondering a few things... 1. what the framing between the posts would look like to attach the metal panels to. 2. Can I get corrugated metal sheets that are wider than 2'? (5-6' would give me a solid panel).

Feb 22, 2007 · By barn metal, do you mean typical corrugated tin? They manufacture (assumming that they still do) a wood strip , flat on the bottom, and profiled to the corrugations that is used as a closure strip. You could apply a bead of construction adhesive, apply a few clamps, then send a few short metal screws , or even pop rivets if you did not want ...

Mar 23, 2011 · Where as sheers and slitting tables actually don't cut but compress the metal which leaves the galvanized or paint intact at the edge, less rust. I'm no expert, personally if they want galvanized currogated metal, they want cheap IMO so I am using the saw. I have only ever bid one such currogated project and they said I was too expensive. Go ...

Mar 20, 2011 · A very good cedar fence and a very good vinyl fence should be around the same cost, and should last for many years to come. Lastly, no matter what you buy, the installer can make or break the fence. A good installer will make your fence look wonderful and a bad installer will cut enough corners to make even the best fences look horrible over time.

Jan 31, 2012 · If the HO wants a skirt I offer a tongue and groove PVC fence board or good quality PVC Lattice - not the big box store quality www.permalatt.com. I use the PVC lattice more on fences and privacy screens though. I have also used 1/2" PVC sheet cut to 4"-6" widths and then painted. Some choose the less expensive wood options.

Sep 19, 2012 · I cant find any definitive info in manufacturer specs with these specific windows. I have 2 pole barns to side with vertical corrugated metal and have to install roughly 10 windows. The windows have flanges and I must cut the J-channel. My question is this. Has anyone done this installation...

Feb 13, 2011 · You can purchase a metal blade for the 7 1/4 saw at any big box. If you are in a bind, turn a standard framing blade around backwards and it will cut through the metal like butter. If you're really out in the sticks, cut about a 2" slit in …

Sep 19, 2022 · I bought an 18" corrugated pipe that I was hoping to easily slide in and cement and backfill. No such luck. I've tried creating a cement base at the bottom of the bell end of the concrete pipe to give the corrugated more of a base to seal around but the running water ate through the cement before it dried and started leaking again.

Nov 30, 2016 · Galvanizing material doesn't move. A clean edge (or polished edge) will have less surface area to rust, and the existing galvanizing material on the metal will prevent the rust creep. A sheer or nibbler will be cleaner, and not have hot metal sparks that can in-bead into surrounding surfaces which will rust and appear to be as if its the base ...

Oct 17, 2022 · A customer of mine would like me to install welded wire fence around her existing orchard with has galvanized round posts in the corners. I've installed welded wire fence with wooden posts, but I'm not sure how possible it is to do with metal posts. How the hell do you attach it at the corners...